Product Details:
Payment & Shipping Terms:
|
| Voltage: | 380V 3 Phase 50Hz | Warranty: | 1 Year |
|---|---|---|---|
| Power Source: | AC Power | After-sales Service Provided: | Engineers Available To Service Machinery Overseas |
| Capacity: | 3.0X104 Nm3/d | Pressure: | 0.1-10.0 MPa |
| High Light: | 3.0X104 Nm3/D NGL Recovery Unit,DSC Automatic Control NGL Recovery Unit |
||
Customized high efficiency 3.0X104 Nm3/D NGL recovery unit Natural gas liquid recovery unit
Technical performance and characteristics of NGL recovery unit:
1. Dehydration and separation system: this system is a natural gas through the separation device, through low-speed, rotary separation, metal filter screen and other processes to fully separate water, heavy oil, sediment, etc., greatly reducing the load of the subsequent process system and cumbersome maintenance. The remarkable feature of the system is the addition of rotating separation and metal wire mesh filtering devices, the separation effect is significantly increased.
2. Compression and purification system: the compression system adopts oil-free compressor and evaporative condenser for cooling, which has the characteristics of low energy consumption and convenient maintenance.
3. Drying system: this system uses 4A molecular sieve, gas heating and reduction, automatic exchange and other characteristics, good energy saving effect, the labor intensity of operators has been reduced.
4. Refrigeration system: the device adopts ammonia refrigeration cycle system, the compressor is piston refrigeration compressor, the motor power is automatic frequency conversion, the auxiliary machine adopts evaporative condenser and aluminum plate evaporator, which has the functions of energy saving, water saving, good heat exchange effect and so on, and occupies a small area. The valve is not sealed by welding.
5. Cooling and separation system: the system adopts four-stage heat exchange, which makes full use of energy. The preheater, ammonia evaporator and gas-gas heat exchanger are all made of aluminum sheet tube, with good heat exchange effect. The precooling can completely remove water and avoid ice blockage. The separator adopts liquid level automatic discharge to reduce the labor intensity.
6. Automatic control system: the device adopts DSC automatic control system to realize decentralized control, centralized display and operation, with display, monitoring, alarm and other functions, instead of manual operation, improving production efficiency.
Main parameter
| Model no. | NGLC 65-35/25 | NGLC 625-35/15 | NGLC 625-35/30 | NGLC 625-35/60 | NGLC 625-35/80 | NGLC 625-35/140 |
| Standard gas volume X104 Nm3/d | 1.5 | 1.5 | 3.0 | 6.0 | 8.0 | 14.0 |
| Device elasticity X104 Nm3/d | 0.7-2.25 | 0.7-2.25 | 1.5-3.6 | 4.5-6.5 | 4.0-9.0 | 8.0-15.0 |
| Process method |
Alcohol injection and hydrocarbon collection Dry gas (into pipe network) Meet the requirements of pipeline transportation |
Dehydration and hydrocarbon collection | ||||
| Product Type (mixed hydrocarbon + dry gas) |
Alcohol injection and hydrocarbon collection Dry gas (into pipe network) Meet the requirements of pipeline transportation |
Dry gas (CNG / inlet pipe network) | ||||
| Dry gas content |
Alcohol injection and hydrocarbon collection Dry gas (into pipe network) Meet the requirements of pipeline transportation |
<1 ppm | ||||
| C3 yield | >80% (Improve efficiency according to user requirements) | |||||
| Applicable ambient temperature | -40-50 ℃ | |||||
| Inlet pressure | 0.1-10.0 MPa | |||||
| Dry gas outlet pressure | 4.0-23.0 MPa | |||||
| Design pressure of hydrocarbon mixing tank | 2.5 MPa | |||||
| Explosion-proof grade | ExdIIBT4 | |||||
| The control mode | PLC + upper computer | |||||
| Skid sizes | LXWXH: 8000-17000X3500X3000 mm | |||||
Note: the product series parameters are the mainstream of the market, and the devices beyond the scope can be designed separately.
Contact Person: sales
