Product Details:
Payment & Shipping Terms:
|
| Application: | Natural Gas Dehydration | Warranty: | 18 Month |
|---|---|---|---|
| Product Name: | Natural Dehydration Equipment | After Sales Services: | Engineers Available To Service Machinery Overseas |
| Configuration: | Stationary, Portable | Medium: | Natural Gas |
| Voltage: | 380V,415V,50HZ,60HZ | Type: | Water Removal |
| Factory: | OEM With 20 Yers Experience | ||
| High Light: | gas dehydration unit,dehydration units for natural gas |
||
High Pressure Gas Dehydration unit for natural gas processing
Description:
The high pressure gas dehydration unit is installed behind the compressor for high pressure gas.
The use of high pressure external electric heater makes the regeneration bed heating uniform and easy to maintain and repair. At the same time, multi-point temperature monitoring can prevent dry burning and ensure the regeneration effect.
Self-cooled heat transfer is used to preheat the regenerated cold gas after pressure reduction by using the hot gas of the regeneration tower. The purpose of cooling the regenerated hot gas and solving the problem of ice jam after pressure reduction is achieved. The regeneration temperature entering the electric heater is raised and energy consumption is saved in many ways.
Features:
The natural gas dehydration equipment has the below feaures.
1. The main valve of the process adopts the imported needle valve, the exhaust outlet is equipped with pressure butter valve, and the regeneration switching is equipped with air balance pipeline system, so that the air flow can be balanced and the service life of adsorbent can be protected from multiple angles.
(2) Dual drainage valves are used to ensure reliable drainage and no leakage.
(3) Adopt anti-icing plugging pressure regulation design to make the regeneration air flow more smoothly.
Technical parameters:
| 1 | Power of regenerative heater (KW/V) | 12-18/380 |
| 2 | The rated flow (Nm3/h) | 1500, 4000, |
| 3 | Heater design temperature ( °C ) | 350 |
| 4 | Adsorption design pressure (Mpa) | 27.5 |
| 5 | Inlet temperature (°C) | ≤45 |
| 6 | Regenerative design pressure (Mpa) | 3.5 |
| 7 | Inlet oil content (mg/Nm3) | ≤5 |
| 8 | Finished product dew point ( °C) | ≤-60 |
| 9 | Dust content of finshed gas Mg /Nm3 | ≤5 |
| 10 | Dust diamter of finished gas μm | ≤3 |
| 11 | Way to work | The two towers work alternately |
| 12 | Regenerative gas extraction method | High pressure gas extraction decompression regeneration |
| 13 | Cooling way | Air cooled or water cooled * |
| 14 | Mode of operation | Manual or automatic |
| 15 | Overall dimensions (m) | 1.85X1.39X3.19 or 2.25X1.5X2.62 |
| 16 | Weight (kg) | 2600-3000 |
Contact Person: Mr. Arnold Shao
Tel: 86 177 8117 4421
Fax: 86-28-36068273
